Mandosith86

BFB Hero
Hello, forgive me for not posting in a while, I tend to forget after posting in so many places. Anyways I'm currently fixing and finishing up my prototype build. I've applied to both MMCC and the 501st BHG, I just around the corner from finalizing everything. After receiving a fix list from both I began tackling getting things adjusted and repainted. The pictures are after the fixes. I had to correct some details on both vembraces and still have one or two things to button up after reading and rereading the CRL for BHG. Here are some updates I've made and will continue to make, since we all know it's a never ending journey. 20210905_151806.jpg20210905_151806.jpg20210905_151725.jpg20210905_151806.jpg20210905_151725.jpg20210905_151323.jpg20210905_151341.jpg20210905_151426.jpg20210905_151519.jpg20210905_151303.jpg20210905_151244.jpg20210905_151214.jpg20210905_151203.jpg20210905_151155.jpg20210905_151146.jpgIMG_20210905_140423_155.jpgIMG_20210905_140423_194.jpgIMG_20210905_140423_308.jpg20210905_151612.jpg20210905_151548.jpg20210904_133421.jpg20210904_133417.jpg20210830_175523.jpg16308816380915325711025937856039.jpg
 

boba87fett

Admin
Staff member
I absolutely love your build man. So clean with attention to detail. Do you have a list of all your parts and who made them?
 

Mandosith86

BFB Hero
Here is a list of parts and the vendors I've used for my prototype build.

Soft goods: Flight Suit, Boots -Man of War studios
Flak vest- krypton top on Etsy
Armor plates: Chest, collar,abs, backplate, vembraces, and knees- Far Away Creations ABS vacuumed plastic moncal on Etsy
Metal parts: Aluminum Rocket with copper cone, shoulder keys and cod plate keys, wrist darts, Mitchel jetpack greeblie x2 .1 for jetpack and 1 for autoblaster barrel tip, jet nozzle greeblies, jetpack beacon and light assembly, jetpack collar, boot toe spike range finder stalk-Quest Design Canada
Dental files purchased from 01 Hawk on the dented helmet.
The flamethrower interior components were made by andrewhoyt on IG
Helmet was purchased from Ebay 4 years ago seller is unknown.
Helmet pads: Amazon
The rangefinder electronics were purchased from
Kesselspicemines on etsy I had to desolder and modify to fit. The unit has a programmable for the blinking sequence.
The chest display was purchased from katso off of etsy and matches reference and program displayed on the unit.
Ammo Belt was purchased from Magmel Creations
Alco switches and black switch purchased off Amazon
Vembrace Parts: Casio MQ button resin replica, Casio MQ Circuit board resin replica right vembrace whip cord resin replica - blaster conversions on Etsy
Shin tools: squeegee and stirrer - B and H Photo
3-d printed parts
The BiC greeblie was found on thingiverse as a free file
The flamethrower housing, dental expander, everready light, rangefinder, rf housing glass, rf aperture, jetpack tool and shin tool, Sling gun w/button, jetpack harness, autoblaster greeblie, jetpack Rocket top,
Beach towel purchased from Ebay
Mic and voice changer plus speaker-helicalhypercom on Etsy
All the wires for the vembraces were purchased from Amazon and soldered by myself hose connectors were purchased at local hardware stores
5 and 4 pin xlr,Quick disconnects ,co2 tank and hose Amazon
24v hp solenoids -Tameson
24v Power pack-Amazon
12v Power pack. Amazon
Auto blaster Uzi replica and Jetpack 3-d files from Etsy vendors who are no longer listed
Graflex replica thingiverse
Jetpack hardware: hooks loops and gralfex greeblie made by Fullmetalfett on the dented helmet.
Helmet fans-Henry helmet fans Etsy
Fabric supplies: Joanns, Amazon, Local fabric store
Paints: Gloss White, Gloss Black,Gloss Red,Gloss Winter Gray, Flat Black, Flat Paprika, Flat Lagoon, Aluminum,Gold Rustoleum paints- Home Depot
Alclad II Metalic paints: Gold and Copper
Imperial Surfaces: Alumiluster
Creatix: Gloss Black
Primer:SEM self etching automotive primer
Bondo, glaze putty: O'Reilly Auto Parts
Hardware and finishing supplies: Harbor freight tools and Home Depot, and Amazon
3d Printers: FDM Printers-creality ender-3, creality Cr-10 V2
3-d filament: esun pla +
LCD photo resin printer anycubic photon.
Anycubic Clear Resin
All reference material was found on The Dented Helmet and Boba Fett builders
 

Mandosith86

BFB Hero
Very nice! Always nice to see another all white Prototype Fett. Not enough of them out there!
I agree. I'll never forget the day I found out about this costume watching the ESB SE behind the scenes and them talking about it. From that moment on I knew I had to build one!
 
Top